TOPICAL APPLIED PRODUCTS
MVBA 500

Featuring unlimited moisture control from both topical liquids and substrate vapor with no moisture testing required. Zero time added to job for moisture mitigation.
APPROVED FLOORING TYPES
- LVT/LVP
- Sheet goods (vinyl, homogeneous, heterogeneous, fiberglass, felt-backed)
- Rubber (tile and sheet)
- Linoleum
- WPC/WSC
- Cork-backed hard surface
- Cork flooring
- Cork underlayment
- VCT/VET
- Stair treads (rubber and vinyl)
Features and Benefits:
- Simple 1-part system
- Strong early grab, fastcuring formula
- High-strength, waterproof bond
- Self-leveling technology reduces telegraphing
- Intact vapor retarder membrane NOT required
- LEED v4 contributing
- CDPH/EHLB Standard
- Method v1.2
- Meets SCAQMD Rule 1168, 0.1 g/L
- Does not contain methylene chloride and perchloroethylene
- Contributes to low emitting materials
Application Methods:
1/16″ x 1/32″ x 1/32″ U Notch
Flooring Type
LVT/LVP, VCT/VET
Estimated Coverage
220-260 sf/gal
1/16″ x 1/16″ x 1/16″ Sq Notch
Flooring Type
Sheet goods, Rubber tile and sheet, Linoleum, WPC/WSC, Cork-backed hard surface, Cork flooring, Cork underlayment, Stair treads (rubber and vinyl)
Estimated Coverage
150-180 sf/gal
MVEC 710
Moisture Vapor Emission Control
Featuring unlimited moisture control with no moisture testing required. No shot blasting required. Meets performance requirement of ASTM F3010 Para. 5.2 Water Vapor Permeance of < 0.1 per ASTM E96.
FOR GLUE DOWN APPLICATION
STEP 1. MVEC 710 Moisture Vapor Barrier
STEP 2. MVBP 600 Bond Promoter
STEP 3. TAYLOR™ Flooring Adhesive
Features and Benefits:
- No costly moisture testing required
- 1-part system increases ease of install
- Blocks moisture to 100% RH and no limit on MVER (moisture vapor emission rate)
- pH blocker protects from alkali attack
- Fast, 8-hour cure time improves efficiency
- LEED v4 contributing
- CDPH/EHLB Standard Method v1.2
- Meets SCAQMD Rule 1168, 0.05 g/L
- Does not contain methylene chloride and perchloroethylene
- Contributes to low emitting materials
Application Methods:
1/8″ x 1/8″ x 1/16″ V Notch
Estimated Coverage
Up to 120 sf/gal
MVBP 600

Encapsulate existing adhesive residue and transform difficult-to-bond-to surfaces into bondable surfaces with MVBP 600.
FOR GLUE DOWN APPLICATION
STEP 1. MVEC 710 Moisture Vapor Barrier
STEP 2. MVBP 600 Bond Promoter
STEP 3. TAYLOR™ Flooring Adhesive
Features and Benefits:
- Cures to a textured, highly bondable surface
- Encapsulates old adhesive residue (including cutback)
- pH blocker protects from alkali attack
- Seals porous substrates (including gypcrete)
- LEED v4 contributing
- CDPH/EHLB Standard Method v1.2
- Meets SCAQMD Rule 1168, 0.05 g/L
- Does not contain methylene chloride and perchloroethylene
- Contributes to low emitting materials
Application Methods:
1/2″ Short Nap Paint Roller
Estimated Coverage
Up to 250 sf/gal